/************************************************************************/
/*                                                                      */
/*           National Instruments NI-VISA(TM) Software Interface        */
/*           Copyright(c) 1997, National Instruments Corporation.       */
/*                          All rights reserved.                        */
/*                                                                      */
/*             README.TXT file for NI-VISA for Windows 95/NT            */
/*                                                                      */
/************************************************************************/

IMPORTANT NOTES:
----------------

1) This version of NI-VISA supports the following development environments:

   - LabVIEW 4.x
   - LabWindows/CVI 4.x
   - Microsoft Visual C/C++ 4.x, 5.x
   - Borland C/C++ 4.5.x
   - Microsoft Visual Basic 4.x

2) Users who want to use the viPeekXX/viPokeXX macros for platforms on which
   the macros are available must define a macro called NIVISA_PEEKPOKE before
   including "visa.h".  Please note that the macros are currently available
   only on the following platforms:

   - Win32 (All C compilers)
   - Win16 (Microsoft and Borland C compilers only)
   - Solaris (LabWindows/CVI only)

3) When compiling C source code, you may need to inform your compiler where
   to find the VISA header files and libraries.  For LabWindows/CVI, VISA
   support is built-in, so the location of the VISA files is already known.

   For Microsoft Visual C/C++, you can add the following entries to your
   AUTOEXEC.BAT file.  This assumes a Windows 95 installation into C:\VXIPNP:

   SET INCLUDE=%INCLUDE%;C:\VXIPNP\WIN95\INCLUDE
   SET LIB=%LIB%;C:\VXIPNP\WIN95\LIB\MSC

   Alternatively, in the Microsoft Visual C/C++ environment, you can add the
   above directories to your project by selecting the Project|Settings menu
   option and changing the directory entries in the 'C/C++' and 'Link' tabs.

   For Borland C/C++, you can add the directories to your project by choosing
   the Options|Project menu option and modifying the 'Directories' topic.

   For other compilers, refer to the documentation that came with your
   compiler package for detailed information about how to inform the compiler
   and linker about the VISA header files and libraries in the VXIplug&play
   directory tree.

4) NI-VISA supports multiple GPIB-VXI controllers in a single system.
   Because the National Instruments GPIB-VXI controller ships with its
   primary address set to 1, NI-VISA will automatically search for any 
   GPIB-VXI controllers at that address.

   If you have changed the primary address (for example, if you added a
   second GPIB-VXI controller to your system, and set the address of the
   second controller to 9), or if you have a GPIB-VXI controller from another
   vendor, then you need to use T&M Explorer so that NI-VISA can find it.
   Select the 'Add Device' menu option to add a new GPIB-VXI interface.
   Specify the controller's GPIB primary and secondary addresses, as well as
   the GPIB board to which it is connected.  Then specify a new GPIB-VXI
   interface number and its logical address (usually 0).

   If you are using a GPIB-VXI command module from another vendor, you also
   need to obtain and install that vendor's VISA GPIB-VXI component.

5) Not all features are currently supported in this beta release.  This
   includes the remote configuration of National Instruments VXI-DAQ
   devices.  Use the DAQ Configuration Utility to configure these devices.
   Also, NI Spy does not log NI-488.2 functions.


NI-VISA 1.2 - OVERVIEW:
-----------------------

This release of NI-VISA 1.2 for Windows 95 and Windows NT
contains two new utilities designed to help you configure and develop your
test system quickly.  These utilities are called T&M Explorer and NI Spy.

T&M Explorer allows you to view your entire T&M system and configure various
components.  When you launch T&M Explorer you see all your VXI, GPIB, and
Serial devices on the screen.  You can view the properties (such as logical
address, address space used, primary address, and so on) of each device by
right-clicking on the device in the tree.  When you view the properties of a
National Instruments device, you can configure the hardware settings directly
in the properties pages.  Before T&M Explorer, you had to use an assortment of
other utilities, such as VXIedit, VISAconf, and WDAQConf.

T&M Explorer also has many new features, such as an option to run Resource
Manager at computer start-up, and troubleshooters to guide you through
configuration conflicts and errors.  Instead of digging through the pages of
text output that resman provides to hunt for errors and warnings, you can use
T&M Explorer to graphically display warnings and errors so they are plainly
visible.

NI Spy tracks the calls your application makes to National Instruments T&M
drivers including NI-VXI, NI-VISA, and NI-488.2.  NI-488.2 users may notice
that NI Spy is very similar to GPIB Spy.  It highlights functions that return
errors, so you can quickly spot which functions failed during your
development.  NI Spy can log your programs' calls to these drivers so you can
check them for errors at your convenience.

These utilities are designed to lessen the time it takes to configure and
debug a system.  With added help features and advanced debugging techniques,
we hope that you will find them useful.
